Speaker System Loewe Individual Sound On The Dolby Digital Decoder Of The Tv Set - Loewe SPHEROS R 32 Operating Instructions Manual

Operating additional equipment
Speaker system Loewe Individual Sound on
the Dolby Digital Decoder of the TV set
Setup
The arrangement of speakers and TV set can look like the illustration
below:
The front and surround speakers should be installed symmetrically to the
TV set and to your sitting position.
You can place the subwoofer anywhere on the floor. We recommend
placing it in front asymmetrically next to the TV set.
The TV speakers are used as center speakers.
For the settings in the sound components wizard enter the distances of
the centre speaker, and the front and surround speakers to your sitting
position. This guarantees a natural spatial image of the sound.
Front
Left
Surround
Left
Setup example for Loewe Individual Sound
- 40
TV speaker
as Center.
Front
Right
Subwoofer
Surround
Right
Connecting
Before connecting any devices ensure that they are switched off or
unplug their mains plug.
Subwoofer without AUDIO LINK interface:
Plug the adapter cable to the AUDIO LINK interface of the TV set. Connect
the cinch connections of the adapter cable to the 6-pin cinch connections
of the subwoofer. Use the cinch cable which comes with the subwoofer
for this.
The cubic plug cable connects the master connection on the subwoofer
to the cubic plug of the adapter cable.
The adapter and cubic plug cable are available from your dealer (see
Accessories, page 55).
Subwoofer with AUDIO LINK interface:
The subwoofer is connected to the TV set via the AUDIO LINK interface. Use
the AUDIO LINK cable which comes with the subwoofer for this (illustrated
by the grey dotted line in the figure).
AUDIO LINK cable
(subwoofer without
(subwoofer with AUDIO LINK)
Connecting Loewe Individual Sound (Subwoofer) to the TV set
Individual Sound (subwoofer)
Power OUT
R
Surr.
L
R
Front C
L
Line IN
Right Subw. Left
Surr.
Front
Right Center Left
Master
cubic plug
cable
adapter cable
AUDIO LINK)
TV set
ON
OFF
Bass Intensity
Min. Max.
Phase
0 180
230V~50/60Hz
6-pole cinch
cable