Selecting A Combination Using A Connected Assignable Foot Switch; Selecting A Combination Using Incoming Midi Program Changes - Korg Trinity series Basic Manual

3. Select and play a combination
Selecting a combination using a connected assignable
foot switch
Connect an assignable foot switch (an on/off type switch such as the separately sold Korg PS-1) to
1
the rear panel SWITCH jack.
Press the [GLOBAL] key.
2
You will enter Global mode.
Press the [P1] key.
3
The page 1 display will appear.
Press the Foot Switch popup button.
4
The popup menu will appear.
In the popup menu, press Program Up or Program
5
Down.
If Program Up is selected, the next combination
number will be selected each time you press the
foot switch.
If Program Down is selected, the previous combi-
nation number will be selected each time you
press the foot switch.
Set the Foot Switch Polarity to match the polarity of the pedal that is connected.
6
If a Korg PS-1 pedal switch is connected, set this to "–".
Press the [COMBI] key.
7
You will enter Combination Play mode.
Use the assignable foot switch to select combinations.
8
Selecting a combination using incoming MIDI Program
Changes
When the TRINITY receives a Bank Select or Program Change message on the channel that
matches its own Global MIDI channel setting, the combination will change.
It is also possible to select the program for each timbre in this way.
For details refer to "10. MIDI applications" on page 58 in this manual.
16
Unless the polarity setting matches, the pedal will not function correctly.
4
6