Song Realtime Recording Procedure; Preparations For Recording; Overwrite Recording - Korg Trinity series Basic Manual

Trinity series music workstation drs
Hide thumbs Also See for Trinity series:
Table of Contents

Advertisement

5. Sequencer mode

Song realtime recording procedure

Preparations for recording

Before you record, make track settings. The settings of steps
tab pages 1–7.
In Sequencer mode, press the [P1] key.
1
The page 1 display (Track Play/Rec) will appear.
Press Song.
2
Use the numeric keys to input the song number that
3
you wish to record, and press the [ENTER] key.
If you select a song number that you will be
recording for the first time, the Create New Song
dialog box will appear.
Press the OK button.
Press Track to specify the track that you wish to
4
record.
In Program, select the program for the track that you wish to record.
5
If necessary, make settings for Pan and Volume.
If necessary, set the effect send levels in Send 1, 2 of tab pages 3 and 4.
Set Metronome to Rec, and then press the [REC/WRITE] key.
6
The metronome will begin sounding.
This will cause the metronome to sound. If you do not hear it, adjust the pre-count and output
level settings in tab page 7 (Pref.) Metronome.
Set Tempo to Manual.
7
While you listen to the metronome, set a tempo of q .
8
Use Meter and specify the time signature.
9
If necessary, press Resolution and make realtime quantize settings.
Check the Multi Rec box for multi-channel recording.
In this case, tracks with a Track PLAY/MUTE/REC setting of REC will record MIDI messages
whose channel matches their own MIDI channel setting. (The setting of
want to use multi-channel recording, refer to the explanation of Multi Rec in Parameter Guide
page 78, "1–1e: Meter/Metronome/Resolution/Multi Rec/Remove Data."

Overwrite recording

If you are recording the song for the first time, use this method to record.
Make the preparations described in "Preparations for recording." (above).
1
Press tab button 7 (Pref.).
2
The Preference display will appear.
In Recording Setup, select OverWrite.
3
Overwrite recording mode will be selected.
In Location, specify the location at which recording
4
will begin.
If you are recording a song for the first time, you
cannot change the location. Skip to Step
Press the [REC/WRITE] key, then press the [START/
5
STOP] key.
Recording will begin. Play the keyboard and oper-
ate the controllers (joystick, etc.), and the data will
be recorded.
Press the [START/STOP] key.
6
Recording will end, and you will return to the location where recording began.
If you press the [PAUSE] key instead of the [START/STOP] key, recording will be temporarily
halted. Recording will resume when you press the [PAUSE] key once again. When you finish
recording, press the [START/STOP] key.
44
1
9
are made in Sequencer mode P1
2
4
6
7
8
9
5
4
5
.
3
4
will be ignored.) If you

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents