Play Back The Second Demo Song; Play Back A Song At A Time - Korg Trinity series Basic Manual

1. Listening to the demo songs

Play back the second demo song

Stop demo song playback, and use the following
procedure.
In the Sequencer mode page 1 display, press Song.
1
Press the numeric key 1, and press the ENTER key.
2
The second song will be selected.
Press the [START/STOP] key on the front panel.
3
The second song will playback.
To stop demo playback during the song, press the
[START/STOP] key once again.

Play back a song at a time

Here's how to play back song 1. After song 1 is played back, song 2 will be ready for playback.
In the Sequencer mode page 1 display, press tab 7 button (Pref.).
1
The Preference tab page will appear.
Press Song.
2
The popup menu will appear.
Press numeric key 0, and press the [ENTER] key.
3
The first song will be selected.
You can also select this by pressing the first song
in the popup menu.
You can also select song 1 by using other VALUE
controllers ( page 8 in this manual).
Press the song edit cell that appears under Next
4
Song.
Press numeric key 1, and press the [ENTER] key.
5
The second song will be selected.
Check the Chain To Song box.
6
The first and second songs will be connected.
Un-check the Continue box.
7
With this setting, pressing the [START/STOP] key will cause the first song to start, and playback
will stop before the second song begins. When you press the [START/STOP] key once again, the
second song will begin playing.
If this box is checked, when you press the [START/STOP] key, the first and second songs will be
played back consecutively.
Press the [START/STOP] key.
8
To stop playback during the song, press the [START/STOP] key once again.
When song 1 is finished, playback will stop automatically.
12
1
2
4
6 7 1