Select And Play A Program; Selecting A Program Using The Front Panel Switches - Korg Trinity series Basic Manual

2. Select and play a program

The programs that are available on the TRINITY will depend on the model, and on whether the
Playback Sampler/flash ROM option and/or the MOSS-TRI option are installed ( page 9 in this
manual).
For the factory preset program names, refer to the separate Voice Name List booklet.
There are three ways to select programs.

Selecting a program using the front panel switches

1
Select the mode
2
Press the [PROG] key.
1
You will enter Program Play mode.
Press the program name.
2
The display will invert.
3
Press the [BANK] key several times to select the bank.
3
Use the numeric keys to input the program number, and press the [ENTER] key.
4
Alternatively, you can use the VALUE controller to make your selection.
You can also use the popup buttons to select programs. Programs can be selected by category
using Select By Category in the page menu ( page 26 in this manual).
3
Select the program edit cell
Select the bank
2. Select and play a program
4
Select the program number
13