4.2.2
Push Tractor Unit Removal
Remove the push tractor unit before removing the circuit boards and the printer mechanism from the lower
case.
Remove the upper case (Refer to Section 4.2.1.).
Step 1 :
Position the paper release lever at the its front setting.
Step 2:
Step 3:
Remove the two CBS(0) (M3x6) screws securing the push tractor to the printer mechanism.
Step 4:
Remove the push tractor unit by pushing
a) Right Side View
it to the
CBS(0) (M3x6)
A
Push Tractor unit Removal
Figure 4-6.
4-7
back.
b) Left Side View