Deleting Station Name/Disc Title (Station Name/Title); Setting Guide Tone (Guide Tone); Setting Clock Display (Clock On/Off) - Eclipse CD5100 Owner's Manual

Press the [SELECT] (Right/Left)
4
button to select the position in
which to enter the character.
The character will be inserted where
the cursor is flashing.
Right: Advances the cursor to the
right.
Left: Returns the cursor to the left.
Press the [SELECT] (Upper/Lower)
5
button to select characters.
Upper: Advances
forward in its type.
Lower: Moves the character backward
in its type.
[Symbol] Initial value [!]
! ↔ " ↔ # ↔ $ ↔ % ↔ & ↔ ' ↔ ( ↔
) ↔ ∗ ↔ + ↔ , ↔ - ↔ . ↔ / ↔ : ↔ ; ↔
< ↔ = ↔ > ↔ ? ↔ @ ↔
! ↔
[Upper-case alphabet characters] Initial
value [A]
A ↔ B ↔ C ↔
A ↔
[Numeric characters] Initial value [1]
1 ↔ 2 ↔ 3 ↔
1 ↔
Press the [ENTER] button to store
6
the title.
ATTENTION
• To change the type of character to be
entered, repeat steps 3 and 5.
• A maximum of 16 characters may be
entered per title.
• 30 titles can be stored.
• When the data storage area is full of data,
"FULL DATA" appears. To enter data newly,
delete the old data to make room.
Press the [CUSTOM/MENU]
7
[RTN] button to exit
the character
`
↔ _ ↔
↔ X ↔ Y ↔ Z ↔
↔ 8 ↔ 9 ↔ 0 ↔
or
function
Making changes with Function Mode
Deleting station name/disc title
(Station Name/Title)
Press the [RTN] button for more
1
than two seconds, when title
setting mode is activated.
The station name/disc title
displayed at this point will be deleted.
Press the [CUSTOM/MENU]
2
[RTN] button to exit function mode.

Setting guide tone (Guide Tone)

The main unit is set at the factory to emit a beep
tone in response to button operation. The guide
tone feature may be disabled in the following
procedure:
Press the [SELECT] (Upper/Lower)
1
button to select the Guide Tone.
2
Press the [ENTER] button.
The guide tone setting mode is
activated.
Press the [SELECT] (Upper/Lower)
3
button to select the guide tone ON/
OFF.
Press the [CUSTOM/MENU]
4
[RTN] button to exit function mode.
Setting clock display (Clock ON/
OFF)
Switches the clock display to ON/OFF.
Press the [SELECT] (Upper/Lower)
1
button to select the Clock ON/OFF.
2
Press the [ENTER] button.
The clock display setting mode is
activated.
Press the [SELECT] (Upper/Lower)
3
button to select the clock display
ON/OFF.
that is
or
XII
or
57