Changing Scroll Pattern (Scroll Pattern) - Eclipse CD5100 Owner's Manual

Press the [SELECT] (Upper/Lower)
10
button to select the image data you
want to overwrite.
11
Press the [ENTER] button.
Begin importing the data into the main
unit. If the data has already been
imported, the data will be overwritten.
When importing
[Completed] will appear and the front
panel opens automatically, and CD-Rs
will automatically eject. Press the [
(OPEN/EJECT)] button to close the
previous panel.
Press the [CUSTOM/MENU]
12
[RTN] button
adjustment mode.
CAUTION
On the CD-R or USB memory, if there is no
file whose data type is the one you
selected, [NO DATA] will be displayed and
return to the previous screen.
ATTENTION
• When playing a music file in USB memory,
E-iSERV data stored in the USB memory
cannot be read into the main unit.
• To load data into the main unit, you have to
make a special
information about how to make the folder,
refer to the E-iSERV manuals.
CAUTION
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the [VOL] button can be operated
while the system is reading data.
has completed,
or
to exit sound
folder. For detail
Making changes with Display Adjustment Mode
Changing scroll pattern (Scroll
Pattern)
The scroll pattern of the text display can be
switched.
Press the [SELECT] (Upper/Lower)
1
button to select the Scroll Pattern.
2
Press the [ENTER] button.
The scroll pattern setting mode is
activated.
Press the [SELECT] (Upper/Lower)
3
button to select scroll pattern.
When the button is pressed, the scroll
pattern changes in the following order.
UP: ONCE
DOWN:REPEAT
Once: Text will scroll once before
changing to a fixed display
Repeat: Text will continue to scroll
The selected settings will take effect.
Press the
4
[RTN] button
adjustment mode.
[CUSTOM/MENU]
to exit display
XI
or
55