DURKOPP ADLER 838 Instruction Manual page 31

Maintenance work
to perform
- Cleaning the oil collector
- Cleaning the fan screen
Maintenance work
to perform
Pneumatic system
Check the water level in the
pressure regulator.
Clean the filter insert.
Check the system for leaks.
Explanation
Clean the oil collector (8) of dirt and
contaminated oil.
(It can be cleaned with a special vacuum
cleaner.)
Clean the fan screen (9).
(It can be cleaned with the compressed air
gun.)
6
4
8
2
10
Explanation
The water level must not rise as far as filter
insert (1).
- Use pressure to blow out the water from
water separator (2) after loosening the drain
screw (3).
The filter insert (1) is used to filter out dirt and
condensation.
- Separate the machine from the compressed
air supply.
- Unscrew drain screw (3).
There must be no pressure on the
machine's pneumatic system.
- Unscrew the water separator (2).
- Unscrew the filter insert (1).
Wash out the dirty filter bowl and filter
insert with benzine (do not use a cleaning
solvent). Then blow dry.
- Reassemble the service unit.
Operating interval
(hours)
20
20
1
2
3
Operating interval
(hours)
40
500
500
GB
29