DURKOPP ADLER 838 Instruction Manual page 32

9.2 Lubrication
30
Caution: danger of injury!
Oil can cause skin eruptions.
Avoid protracted contact with the skin.
In the event of contact, thoroughly wash the affected area.
Caution!
The handling and disposal of mineral oils is subject to legal regulation.
Deliver used oil to an authorized collection point.
Protect your environment.
Take care not to spill oil.
Oil the sewing machine exclusively with the lubricating oil DA-10, or
equivalent oil with the following specifications:
–
Viscosity at 40°C
–
Flash point
DA-10 is available from DÜRKOPP ADLER point of sale under the
following part numbers:
250-ml container:
1 litre container:
2 litre container:
5 litre container:
All areas in the machine head that must be lubricated with oil are
supplied from the central reservoir (1).
–
If the oil level falls below the "MIN" mark (3), you should re-fill
through the hole (2) until the level reaches the "MAX" mark.
–
Be sure to check the oil level daily!
Caution!
Oil should only be re-filled in the central reservoir or shuttle track.
Other places and points should not be individually lubricated.
Otherwise, the oil could get into areas that are not supposed to be
lubricated.
2
1
3
2
10 mm /s
150°C
9047 000011
9047 000012
9047 000013
9047 000014