Fujitsu Siemens Computers pmn User Manual page 476

Message lines
SXPL025 PLM(#25): WARNING : <num> single saved LVs in dual save LV-group <name> found
Meaning
Following a disaster recovery it is possible that logical volumes were first saved in a group
or, if a dual save group has been created from a single save group, old logical volumes
which have only been saved only once were found.
The PLM automatically attempts to save these logical volumes a second time.
Response
You can use the GXCC function "Show logical Volumes" (see
Operations » Show Logical Volumes" on page
question. If they are no longer required, you can delete them.
SXPL026 PLM(#26): ALERT: LV-group file BASE in backup-dir, but not in LV-dir, start
aborted
Meaning
The PLM has detected an inconsistency between primary and secondary data mainte-
nance. Possible reasons for this inconsistency:
– The /DB directory is not mounted.
– Primary data maintenance was not restored after the RAID system was replaced.
Response
Notify maintenance staff.
SXPL027 PLM(#27): NOTICE: PV <name> of tapelibrary <name> is faulty !
Meaning
The PLS or a PDS have reported an error indicating that this physical volume can no longer
be used.
Response
If the (possibly manually started) physical volume is reorganized (if this is possible), then it
can be removed. In the case of the PLS, the error may be due to a temporary robot problem.
For this reason, when PLS errors occur, you should check whether the error message is
justified or whether the cause can be eliminated by intervening in the robot. Notify mainte-
nance staff if necessary.
SXPL028 PLM(#28): NOTICE: No PVs existing for PV-group <name>
Meaning
When the PLM was started, a physical volume group without physical volumes was found.
Response
If this state of affairs is intentional, you do not need to do anything. Otherwise add physical
volumes to this group.
SXPL029 PLM(#29):CRITICAL: missing licence for dual save !
Meaning
An LV group is configured for dual save, but the required license key is missing.
476
Explanation of console messages
section "Logical Volume
203) to find out the logical volumes in
U41117-J-Z125-7-76