Description Of The E-Mail Formats - Fujitsu Siemens Computers pmn User Manual

Appendix
The normal procedure is for an e-mail to be sent starting with the error weight ERROR. In
the case of the error weights NOTICE and WARNING, only very few, specially selected
messages are offered for e-mail dispatch, for example SXPL027
(page 479) and SXPL050

12.2.4 Description of the e-mail formats

The sample file has the name:
/usr/apc/bin/msg_mail.config.sample
The e-mail-format-specific configuration file must be stored under the following name:
/usr/apc/conf/msg_mail.conf
The content of the e-mail can be defined using the configuration variables shown below:
System details
●
Device_name=""
Serial_Number=""
Customer details:
●
Customer_number=""
Customer_name=""
Customer_phone=""
Customer_email=""
Freely usable text area:
Remark1=""
Remark2=""
Remark3=""
Remark4=""
Remark5=""
Remark6=""
Undefined entries (=
The subject of the mail is made up of error-related entries:
Message from $Device_name $Serial_Number $ErrorWeight $MSG_NUMBER
In addition to the information shown above, the e-mail contains the error message and
details of the kernel version installed.
U41117-J-Z125-7-76
(page 479).
) are masked out in the e-mail.
""
E-mail support in CentricStor
(page 476), SXPL049
561