Fujitsu Siemens Computers pmn User Manual page 274

History data
After you click on "OK" or "Refresh" the following window appears:
The following data is displayed:
pos
LVG
PVG1
PVG2
LVs
pending jobs
recover jobs
lv-size
274
Line number
Name of the logical volume group
Name of the first or only assigned physical volume group, or -===== if empty
Name of the second assigned PVG (if assigned - Dual Save), or -===== if
empty
Number of logical volumes in this group
Number of jobs which the PLM has accepted for this LVG.
Number of logical volumes in a dual-save group detected when starting the
PLM for which only a single save has been performed. Another save is
performed automatically so that 2 copies are avilable again. The list of these
LVs can be viewed when a special LV group is output.
Size of the logical volumes:
STD Standard = 900 MB
EXT_x Extended: x specifies the volume size in GB (2, 5, 10, 20, 50,
100 or 200)
Global Status
U41117-J-Z125-7-76