Fujitsu Siemens Computers pmn User Manual page 122

Main window
i
i
– Profile file
Name of the profile file. This can be specified on startup using the -profile parameter,
or selected from the function bar at any time.
– CentricStor version
– ID=<IP-address>:<host-name>:<port-numer>
Host features with which you monitor CentricStor
– Conn:n
Number of connections which exist to the monitored system
– Connection mode (MP: Multi-Port, SP: Single-Port)
– GXCC mode
Access permissions under which GXCC is currently running:
SERVICE
USER
OBSERVE/OBSV
– Scale
Display scale set under "Options Settings" (see the section
– Autoscan
Text color indicating the operating status of the Autoscan facility:
Green:
Yellow:
Red, flashing: Autoscan temporarily stopped
White:
The Autoscan process will also be stopped temporarily for certain operations. In this
case, the text color switches back to green once the operation in question is completed.
i
– Scan mode
S
M
122
An error flag (yellow or pink) can be displayed only if the Infobroker has been
started and is operational. Consequently in certain situations, especially during
the boot phase of individual ISPs, it can occur that an overall status of turquoise
(OK) is displayed even though the status of individual ISPs is shown as not op-
erational in the GXCC main window.
Further information is provided in
SNMP" on page 549.
GXCC is running in Service mode
GXCC is running in User mode
GXCC is running in Observe mode
Autoscan active
Alignment with the InfoBroker currently in progress
Locked (Simulation mode)
The Autoscan facility is described in more detail on
Scan rate determined automatically (self-adjusting)
Scan rate set manually (see the section
section "GXCC as a monitoring tool without
"Settings" on page
page
"Settings" on page
GXCC
153).
152.
153)
U41117-J-Z125-7-76