Fujitsu Siemens Computers pmn User Manual page 292

History data
Otherwise the status of the reorganization of the physical volume group(s) is displayed:
Meaning of the entries:
no.
LV
state
retry
timestamp
The number specified in the retry column also relates to command retries at the PLM-VLM
interface. If the high load on the VLM means that a PLM request could not be satisfied within
this time limit, the job is issued again.
Retries are alarming only if a particular PV is repeatedly connected with a large number of
retries. In this case the logical volumes on the PV must be moved and the PV must be
removed (see the
page 226).
292
Line number
Name of the logical volume
Status of the reorganization:
done Completed
failed Aborted; can only occur with runs started manually
initiated Job sent to VLM
restoring Being moved back to the cache
restore done Moved back to the cache; rewriting has not yet started
saving Being written to tape
start Not yet started
Number of command retries; after more than 2 the job is aborted.
Time at which the current status was entered.
section "Physical Volume Operations » Erase Physical Volumes" on
Global Status
U41117-J-Z125-7-76