Logical Volume Operations » Show Logical Volumes (Physical View) - Fujitsu Siemens Computers pmn User Manual

GXCC
6.2.9.7 Logical Volume Operations » Show Logical Volumes (physical view)
You use this call to display the logical volumes which are known to the PLM together with
their statuses.
i
In contrast to the VLM call the PLM call does not permit the use of wildcards, allowing
instead filtering according to PVG, LVG and tape library.
i
If you only want logical volumes which cannot be accessed to be displayed, you must
activate the "show_inaccessible" button.
U41117-J-Z125-7-76
You obtain statistcs on the logical volumes by calling the function of the same name
for "logical view".
This statistics function supports the refresh function. Information on this function
and the "OK" and "Cancel" buttons is provided on
Function bar
page 267.
207