Fujitsu Siemens Computers pmn User Manual page 473

Explanation of console messages
ERR_PDS_01_INVALID_HEADER_SIGN
Meaning
Tape header has no valid identifier (POS1) at position 0.
Response
Notify maintenance staff.
ERR_PDS_01_TAPE_NON_VTLS
Meaning
Tape header does not have a valid CentricStor identifier.
Response
The volume was probably not imported correctly. Repeat the import procedure.
If necessary, delete header ("Erase physical Volume") and write a new CentricStor-
compatible header to the tape ("Add physical Volume").
ERR_PDS_01_STATE_NOT_INVALID
Meaning
Tape header does not have the status INVALID and cannot therefore be overwritten with
a new header.
Response
Check whether this is the correct physical volume. If so, remove it with the GXCC function
"Erase Physical Volumes" (see
Volumes" on page
ERR_PDS_01_STATE_NOT_VALID
Meaning
Tape header has the status INVALID and can therefore no longer be used for write/read
operations. A new header must be written to the tape.
Response
The problem was probably caused by manual intervention in the tape archive. If this is
definitely not the case, notify maintenance staff.
ERR_PDS_01_NOT_ERASED
Meaning
Tape header is not marked with the status INVALID and can therefore not be assigned
a new header.
Response
This is probably due to an operating error while inserting a cartridge, or the cartridge was
not removed properly from CentricStor earlier. Export the cartridge in the proper manner or,
if necessary, write a header marking the tape as INVALID to the tape using the utility
routine.
U41117-J-Z125-7-76
section "Physical Volume Operations » Erase Physical
226).
Message lines
473