Lenovo System Toolbox; Pc-Doctor For Rescue And Recovery; Pc-Doctor For Dos - Lenovo ThinkCentre M90 Hardware Maintenance Manual

Hardware maintenance manual
Hide thumbs Also See for ThinkCentre M90:
Table of Contents

Advertisement

To run the Lenovo Solution Center program on the Windows 7 operating system, click Start ➙ All Programs
➙ Lenovo ThinkVantage Tools ➙ System Health and Diagnostics. Follow the instructions on the screen.
For additional information, refer to the Lenovo Solution Center help system.
Note: If you are unable to isolate and repair the problem yourself after running the program, save and print
the log files created by the program. You will need the log files when you speak to a Lenovo technical
support representative.

Lenovo System Toolbox

Note: The Lenovo System Toolbox program is only available on computers preinstalled with Windows Vista
or Windows XP from Lenovo.
The Lenovo System Toolbox program is a diagnostic program that works through the Windows operating
system to enable you to view symptoms and solutions for computer problems, access the Lenovo
troubleshooting center, update system drivers, and review system information.
To run the Lenovo System Toolbox program, click Start ® All Programs ® Lenovo Services ® Lenovo
System Toolbox. Follow the instructions on the screen. For additional information about running the
diagnostic program, refer to the Lenovo System Toolbox help system.

PC-Doctor for Rescue and Recovery

The PC-Doctor for Rescue and Recovery diagnostic program is part of the Rescue and Recovery workspace
on each Lenovo computer. Use the PC-Doctor for Rescue and Recovery diagnostic program if you are
unable to start the Windows operating system.
To run the PC-Doctor for Rescue and Recovery diagnostic program from the Rescue and Recovery
workspace, do the following:
1. Turn off the computer.
2. Repeatedly press and release the F11 key when turning on the computer. When you hear beeps or see a
logo screen, stop pressing the F11 key. The Rescue and Recovery workspace opens after a short delay.
3. From the Rescue and Recovery workspace, select Launch advanced Rescue and Recovery ®
Diagnose hardware. The PC-Doctor for Rescue and Recovery diagnostic program opens.
4. Select the diagnostic test you want to run. Then, follow the instructions on the screen.
For additional information about running the PC-Doctor for Rescue and Recovery diagnostic program, refer
to the PC-Doctor for Rescue and Recovery diagnostic program help system.
Note: If you encounter failures that prevent you from gaining access to the Rescue and Recovery workspace,
you can run the PC-Doctor for Rescue and Recovery diagnostic program after using a rescue medium to
recover the computer from failures and gaining access to the Rescue and Recovery workspace.

PC-Doctor for DOS

You can also download the latest version of the PC-Doctor for DOS diagnostic program from
http://www.lenovo.com/support. The PC-Doctor for DOS diagnostic program runs independently of the
Windows operating system. Use the PC-Doctor for DOS diagnostic program if you are unable to start the
Windows operating system or if the two diagnostic programs preinstalled on your computer have not
been successful in isolating a possible problem. You can run the PC-Doctor for DOS diagnostic program
from a diagnostic disc that you created.
36
ThinkCentre Hardware Maintenance Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents