Accessory List - Carrier PREMIER 52P SERIES Architects And Engineers' Manual

Architects and engineers’ manual packaged terminal air conditioners and heat pumps
Hide thumbs Also See for PREMIER 52P SERIES:
Table of Contents

Advertisement

ACCESSORY LIST

ACCESSORY
FORM NUMBER
Wall Sleeves
52S-48SI
52S-50SI
52S-49SI
N/A
52C,P-26SI
52C,P-28SI
Exterior Grilles*
52S-59SI
52S-65SI
52S-60SI
52C,P-31SI
Subbase
52C,P-1SI
52C,P-2SI
52C,P-17SI
52C,P-3SI
Subbase
52C,P-4SI
Field-Installed
52C,P-5SI
Kits
Sleeve Support
52C,P-29SI
Electrical
52C,P-11SI
Connections
52C,P-19SI
Condensate
52S-53SI
Drain Kit
Wall
N/A
Thermostats
Wall Thermostat
52C,P-30SI
Interface
Retrofit Kit
52C,P-34SI
N/A
N/A
Replacement
N/A
Filters
Energy
52C,P-24SI
Management
Locking Security
52C,P-23SI
Control Door
Lateral Duct Kit
52C,P-25SI
Power Vent
52C,P-32SI
Retrofit Kit
Air/Curtain
52C,P-9SI
Deflector
52C,P-21SI
Touch-Up Paint
N/A
*Custom colors are also available.
PART NUMBER
WALL-SLEEVE-1PK
Non-Insulated Polymer Wall Sleeve, 1 per pack
WALL-SLEEVE-9PK
Non-Insulated Polymer Wall Sleeve, 9 per pack
SLEEVE-INSUL-1PK
Insulated Polymer Wall Sleeve, 1 per pack
SLEEVE-STEEL-1PK
Insulated Metal Wall Sleeve, 1 per pack
SLEEVE-EXT18-1PK
Extended Metal Wall Sleeve for Deep Wall Applications (18 in. deep), 1 per pack
SLEEVE-EXT24-1PK
Extended Metal Wall Sleeve for Deep Wall Applications (24 in. deep), 1 per pack
SLEEVE-EXT26-1PK
Extended Metal Wall Sleeve for Deep Wall Applications (26 in. deep), 1 per pack
SLEEVE-EXT28-1PK
Extended Metal Wall Sleeve for Deep Wall Applications (28 in. deep), 1 per pack
SLEEVE-MOLDING
Molding kit to trim the wall sleeve to the wall
FR-SLEEVE-EXT
Friedrich wall sleeve extension to retrofit Carrier PTAC unit into Friedrich 11
(T Series) wall sleeve. 1 per pack
CM-SLEEVE-EXT
Climate Master Wall Sleeve extension to retrofit Carrier PTAC unit into Climate Master 12
GRILLE-ALU-STAMP
Stamped Aluminum Exterior Grille, Clear Finish
GRILLE-PLA-BROWN
Polymer Architectural Rear Grille, Brown
GRILLE-PLA-BEIGE
Polymer Architectural Rear Grille, Beige
GRILLE-PLA-ALPIN
Polymer Architectural Rear Grille, Alpine (matches Carrier Wall Sleeve)
GRILLE-ALU-CLEAR
Aluminum Architectural Exterior Grille, Clear Finish
GRILLE-ALU-WHITE
Aluminum Architectural Exterior Grille, White
GRILLE-ALU-BRONZ
Aluminum Architectural Exterior Grille, Light Bronze
GRILLE-ALU-MBRNZ
Aluminum Architectural Exterior Grille, Medium Bronze
GRILLE-ALU-BROWN
Aluminum Architectural Exterior Grille, Brown (Dark Bronze)
GRILLE-ALU-BEIGE
Aluminum Architectural Exterior Grille, Beige
GRILLE-ALU-ALPIN
Aluminum Architectural Exterior Grille, Alpine (matches Carrier Wall Sleeve)
GRILLE-ALU-PEACH
Aluminum Architectural Exterior Grille, Peach
GRILLE-ALU-MELON
Aluminum Architectural Exterior Grille, Melon
GRILLE-ALU-LGREY
Aluminum Architectural Exterior Grille, Light Grey
GRILLE-ALU-SGREY
Aluminum Architectural Exterior Grille, Slate Gray
GRILLE-ALU-RDBRK
Aluminum Architectural Exterior Grille, Red Brick
GRILLE-ALU-BLUE
Aluminum Architectural Exterior Grille, Blue
GRILLE-ALU-GREEN
Aluminum Architectural Exterior Grille, Green
BAFFLE-KIT-1PK
Ensures good air seal and prevents air recirculation when Carrier sleeve is used with a non-Carrier grille.
SUBBASE-NON-ELEC
Non-electrical Subbase
SUBBASE-230V-15A
Electrical subbase with factory-installed 208/230V, 15 amp receptacle
SUBBASE-230V-20A
Electrical subbase with factory-installed 208/230V, 20 amp receptacle
SUBBASE-230V-30A
Electrical subbase with factory-installed 208/230V, 30 amp receptacle
SUBBASE-265V-15A
Electrical subbase with factory-installed 265V, 15 amp receptacle
SUBBASE-265V-20A
Electrical subbase with factory-installed 265V, 20 amp receptacle
SUBBASE-265V-30A
Electrical subbase with factory-installed 265V, 30 amp receptacle
SUBBASE-HARDWIRE
Electrical subbase with factory-installed hardwire kit (230/208V and 265V)
SUBBASE-SWITCH
Field-Installable Switch kit for an electrical subbase
SUBBASE-FUSE-15A
Field-Installed Fuse Kit (15 amp) for electrical subbase
SUBBASE-FUSE-20A
Field-Installed Fuse Kit (20 amp) for electrical subbase
SUBBASE-FUSE-30A
Field-Installed Fuse Kit (30 amp) for electrical subbase
LEVELING-LEGS
Attaches to wall sleeve for accurate and adjustable leveling and support for units without a subbase
HARDWIRE-KIT-1PK
Permanent power connection to the unit (includes 36" of flexible conduit and unit-mounted
connector, 230/208V and 265V) 1 per pack
CONDUIT-INTF-4PK
Interface kit for field-supplied conduit to provide permanent power connection
(230/208V and 265V) to the unit. Kit includes Molex connector for easy connect/disconnect.
4 per pack
DRAIN-KIT-4PK
Attaches to wall sleeve for controlled internal or external disposal of condensate-4 per pack
HH01AD045
Electro-mechanical Wall Thermostat (Heat/Cool and Heat Pump)
TSTATCCBPC01-B
Value Series Electronic Thermostat w/Digital display (Heat/Cool Models)
TSTATCCBPH01-B
Value Series Electronic Thermostat w/Digital display (Heat Pump Models)
TSTATCCPAC01-B
7-Day Programmable Electronic Thermostat (Heat/Cool Models)
TSTATCCPHP01-B
7-Day Programmable Electronic Thermostat (Heat Pump Models)
RC-FIELDKIT230HC
Field-installed wall thermostat retrofit kit to convert a standard 230V Heat/Cool unit to an
RC unit. Wall thermostat sold separately (can be used to convert a cool only unit to RC).
RC-FIELDKIT230HP
Field-installed wall thermostat retrofit kit to convert a standard 230V Heat Pump unit to an
RC unit. Wall thermostat sold separately.
RC-FIELDKIT265HC
Field-installed wall thermostat retrofit kit to convert a standard 265V Heat/Cool unit to an
RC unit. Wall thermostat sold separately (can be used to convert a cool only unit to RC).
RC-FIELDKIT265HP
Field-installed wall thermostat retrofit kit to convert a standard 265V Heat Pump unit to a
RC unit. Wall thermostat sold separately.
2SPEED-TSTAT-KIT
Field-installed automatic heat/cool changeover thermostat with 2-speed fan control at thermostat.
2SPEED-RCFAN-KIT
Multiple fan speed control relay only. Thermostat is not included.
TSTAT-COVER-6X7
Clear plastic locking thermostat cover prevents unauthorized access to thermostat.
Cover for use with non-programmable and electro-mechanical thermostats.
Outside dimensions: 6
TSTAT-COVER-7X10
Clear plastic locking thermostat cover prevents unauthorized access to thermostat. Cover for
use with programmable thermostats. Outside dimensions: 7
AIR-FILTER-10PK
Replacement air filters in package of 10
EM-KIT
Allows unit to be turned on and off from a remote location (includes freeze guard protection)
SECURITY-DOOR
Key-locking security door to prevent access to heating and cooling controls
LATERAL-DUCT
Ductwork to allow one unit to heat and cool two rooms (plenum plus extension duct and registers)
PWR-VENT-DOOR230
Power vent with automatic door that opens and closes when the fan turns on and off (230V).
PWR-VENT-DOOR265
Power vent with automatic door that opens and closes when the fan turns on and off (265V).
DEFLECTOR-1PK
Lateral air deflector, with individually adjustable louvers, to enhance air circulation, 1 per pack
CURTDFL-52CP-1PK
Curtain deflector for 52C and 52P models — prevents curtains from blowing into
discharge air stream. 1 per pack.
NOTE: Curtain deflector for previous models are also available. Contact Carrier Representative.
CARRIER-TOUCH-UP
Touch up paint for repainting scratches or chips.
DESCRIPTION
" x 7
" x 2
". 1 per pack
1
1
15
/
/
/
2
2
16
" x 9
1
/
4
56
" deep
1
/
2
" deep wall sleeve. 1 per pack
1
/
2
" x 3
". 1 per pack
3
/
3
/
4
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comfort 52c series

Table of Contents