Checking A Sample Set Before Copying (Sample Set) - Canon IR3320i Copying Manual

Checking a Sample Set Before Copying
Before making multiple copies, you can check the copy result by using the Sample Set mode.
IMPORTANT
• [Sample Set] is displayed only when you set to make multiple copies in the Collate, Offset Collate, Rotate
Collating, Staple, Cover/Sheet Insertion, or Booklet modes. [Sample Set] is not displayed when you set the
Group mode.
• If you select [Sample Set], you cannot use the Remote Copying and Cascade Copying modes.
NOTE
• The machine's counter counts the sample print as a print.
1
1
Place your originals, and select the desired copy modes.
2
Press [Sample Set], and press
The Sample Set printing starts, and one copy set is made.
1-92

Checking a Sample Set Before Copying (Sample Set)

.
(Sample Set)