Canon IR3320i Copying Manual page 118

2
Select the Cover/Sheet Insertion feature you want to use.
You cannot select the [Sheet Insertion] and [Chapter Page] modes at the same time.
2
NOTE
• Cancel a mode by pressing the mode key again.
3
Press [Paper Select], and select the paper source for each feature, and press [Next].
When you select only the [Chapter Page] mode, proceed to step 5.
IMPORTANT
• Select the same paper sizes for the front and back covers, sheet insertions, or chapter pages.
• If the paper size for one feature is changed to another size, the other two features will be changed. However, you
may change the paper drawer for one feature without affecting the others, as long as the paper size is the same.
2-8 Adding Front and Back Covers, Sheet Insertions, and Chapter Pages to Copy Sets (Cover/Sheet Insertion)