Brother HL-3140CW User Manual page 102

General Information
Network Menu for HL-3140CW and HL-3170CDW (continued)
Submenu 1 Submenu 2
Wi-Fi Direct Device Info.
(Continued) (Continued)
Status Info. Status
I/F Enable
Network Reset Restores all network settings of the internal print server to the factory default.
The factory settings are shown in Bold with an asterisk.
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will
be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually enter an IP
address from the machine's control panel.
2
HL-3170CDW only
Reset Menu
Display Shows
Network
Factory Reset
The factory settings are shown in Bold with an asterisk.
Menu Selections
SSID
IP Address
Signal
Channel
Speed
-
Description
Restores all network settings of the internal print server to the factory default.
Resets the machine and restores the printer settings (including command settings) to the
factory default settings.
Options
-
-
G/O Active(**) /
Client Active /
Not Connected / Off /
Wired LAN Active
** = the number of devices
Strong / Medium / Weak /
None
-
-
On / Off*
Descriptions
Shows SSID of Group Owner.
When the machine is not
connected, the LCD shows
Not Connected.
Shows the IP Address of your
machine.
Shows the Wi-Fi Direct™
network status.
Shows the Wi-Fi Direct™
network signal strength.
When your machine acts as
the Group Owner, the LCD
always shows Strong.
Shows the channel in use
when the Status is
G/O Active(**) or
Client Active.
Shows the connecting speed
when the Status is
G/O Active(**) or
Client Active.
Enables or disables the Wi-Fi
Direct™ connection.
3
3
96