Brother HL-3140CW User Manual page 101

General Information
Network Menu for HL-3140CW and HL-3170CDW (continued)
Submenu 1 Submenu 2
WLAN WLAN Status
(Continued) (Appears only
when
WLAN Enable
is On
and
Wired Enable
is Off.)
MAC Address
Set to Default
(HL-3170CDW)
WLAN Enable
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device Info. Device Name
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
Active(11n) /
Status
Active(11b) /
Active(11g) /
Wired LAN Active
WLAN OFF / AOSS Active /
Connection Fail
2
Strong / Medium / Weak /
Signal
None
-
Channel
-
Speed
-
SSID
Ad-hoc / Infrastructure Shows the current
Comm. Mode
- -
Restores wireless network settings of the internal print server to the factory default.
- On / Off*
- -
- -
- -
- On / Off*
-
Descriptions
Shows wireless Ethernet link
status.
2
/
Shows the signal condition.
Shows the channel in use
when Status is Active.
Shows the connecting speed
when Status is Active.
Shows SSID [uses a
maximum of 32 digits and
characters 0-9, a-z and A-Z in
ASCII values]
Communication Mode.
Shows MAC address of the
machine.
Turns the wireless interface on
or off.
You can easily configure your
Wi-Fi Direct™ network
settings easily using the one-
button push method.
You can easily configure your
Wi-Fi Direct™ network
settings easily using WPS with
a PIN code.
You can manually configure
your Wi-Fi Direct™ network
settings manually.
Sets your machine as the
Group Owner.
You can see the device name
of your machine.
3
95