4. Do one of the following:
• If you are replacing a PCI card, open the PCI card latch and remove the old PCI card that is currently
installed as shown in Figure 10 "Removing the PCI card" on page 77.
Note: If the PCI card is secured in place by a retaining latch
the PCI card from the latch. Then, grasp the PCI card by the edges and carefully pull it out of the
slot. If necessary, alternate moving each side of the PCI card a small and equal amount until it
is completely removed from the PCI card slot.
Figure 10. Removing the PCI card
• If you are installing a PCI card, open the PCI card latch and remove the appropriate PCI card slot
cover. See "Locating parts on the system board" on page 70 to identify the types of PCI card slots.
5. Remove the new PCI card from its static-protective package.
.
Chapter 8
Installing or replacing hardware: 4165, 7179, 7182, 7490, 7493, 7511, and 7521
1
, press the retaining latch to release
77