Lenovo ThinkCentre M80 Hardware Maintenance Manual page 128

Note: Place the heat sink and fan assembly on its side so that the thermal grease on the bottom of it
does not get in contact with anything.
4. Lift the small handle
Figure 56. Accessing the microprocessor
5. Lift the microprocessor straight up and out of the microprocessor socket, as shown in Figure 57
"Removing the microprocessor" on page 121.
Notes:
a. Your microprocessor and socket might look different from the one illustrated.
b. Note the orientation of the microprocessor in the socket. You can either look for the small triangle
on one corner of the microprocessor or note the orientation of the notches
This is important when installing the new microprocessor on the system board.
c. Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
d. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
120
ThinkCentre Hardware Maintenance Manual
1 and open the retainer 2 to access the microprocessor 3 .
1
2
on the microprocessor.