Appendix A Specifications - HP t5325 - Thin Client Hardware Reference Manual

A Specifications
Table A-1 HP t5325 Thin Client
Dimensions
Width (front to back)
Height (top to bottom)
Depth (side to side)
Approximate Weight
Temperature Range (fanless design)*
Operating**
(max. rate of change is 10° C per hour or 18° F per hour)
Nonoperating
(max. rate of change is 20° C per hour or 36° F per hour)
*Specifications are at sea level with altitude derating of 1° C/
300 m (1.8° F/1000ft) to a maximum of 3 Km (10,000 ft), with
no direct, sustained sunlight. Upper limit may be limited by
the type and number of options installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28° C or 84.2° F)
Nonoperating
(max. wet bulb temperature is 38.7° C or 101.6° F)
Maximum Altitude (unpressurized)
Operating
(max. allowed rate of change is 457 m per minute or 1500 ft
per minute)
Nonoperating
(max. allowed rate of change is 457 m per minute or 1500 ft
per minute)
Power Supply
Operating Input Voltage Range
Rated Line Frequency
ENWW
160 mm 6.3 in.
32 mm 1.3 in
123 mm 4.8 in.
490 g 17.3 oz
10° to 35° C 50° to 95° F
-30° to 60° C -22° to 140° F
** The operating temperature range when the thin client
is attached to a flat panel using the HP Quick Release
is 50° to 95° F (10° to 35° C).
10–90% 10–90%
5–95% 5–95%
10,000 ft
3048 m
30,000 ft
9144 m
100–240 VAC 100–240 VAC
50–60 Hz 50–60 Hz
7