Supported Mounting Options - HP t5325 - Thin Client Hardware Reference Manual

Hardware reference guide hp t5325 thin clients

Hide thumbs Also See for t5325 - Thin Client:

Table of Contents

Slide the side of the mounting device attached to the thin client (1) over the other side of the

mounting device (2) on the device on which you want to mount the thin client. An audible 'click'

indicates a secure connection.

Figure C-4

NOTE:

When attached, the HP Quick Release automatically locks in position. You only need to slide

the lever to one side to remove the thin client.

CAUTION:

components, make sure both the release lever on one side of the mounting device and the rounded

opening on the other side face upward.

Supported Mounting Options

The following illustrations demonstrate some of the supported and not supported mounting options for

the mounting bracket.

●

You can mount a thin client between a flat panel monitor and the wall.

Figure C-5

●

You can mount the thin client on the back of a flat panel monitor stand.

Appendix C Mounting the Thin Client

Connecting the thin client

To ensure proper function of the HP Quick Release and a secure connection of all

Thin client mounted with flat panel on wall

ENWW

Table of Contents