TYAN Thunder i7501 Pro S2721-533 Manual page 34

On chip Xeon Thermal Sensor for 400Mhz FSB Xeon
Hardware Monitor Chip 4:
Slave Address:
Sensor Name
CPU2 temperature
Programming CPU thermal sensors for custom Hardware Monitoring
requirements (the GPIO pins are on ICH3)
GPIO27 GPIO28
X X
1 1
0 1
1 0
0 0
Note: if you experience problems with setting up your system, always check the following things in
the following order:
By checking these items, you will most likely find out what the problem might have been when
setting up your system. For more information on troubleshooting, check the Tyan website at:
http://www.tyan.com .
Bank
0
CHANNEL# DEVICES
X Winbond 83782D (Always on)
3 DIMM SPD (6 devices), and CK408B clock chip
2 CPU1 and CPU2 Thermal sensor, Super IO
W83627HF
1 Reserved
0 Reserved
Memory, Video, CPU
http://www.TYAN.com
Intel Xeon Thermal Sensor
0x19h
Register
0x01h
34