2.11 Installing the Power Supply
There are three power connectors on your S8812. It is required that you have an
EPS12V power supply which has one 24-pin and two 8-pin connectors.
24-pin (PWR1)
8-pin (PWR2, PWR3)
NOTE:
Please be aware that ATX 2.x, ATX12V and ATXGES power
supplies may not be compatible with the board and can damage the
motherboard and/or CPU(s).
Applying power to the board:
Connect the EPS12V 8-pin power connectors. Both PW2 and PW3 are for
CPU loading. With light load processors, such as HE model, one 8-pin
connector is OK. With SE model processors, both 8-pin power connectors
are required.
Connect the EPS/12V 24-pin power connector.
Connect power cable to power supply and power outlet.
NOTE:
You must unplug the power supply before plugging the power
cables to motherboard connectors.
Signal
+3.3V
+3.3V
GND
+5V
GND
+5V
GND
Power OK
5VSB
+12V
+12V
+3.3V
Signal
Pin
GND
1
GND
2
GND
3
GND
4
38
http://www.tyan.com
Pin
Pin
1
13
2
14
3
15
4
16
5
17
6
18
7
19
8
20
9
21
10
22
11
23
12
24
Pin
Signal
5
+12V
6
+12V
7
+12V
8
+12V
Signal
+3.3V
-12V
GND
PS_ON
GND
GND
GND
RES
+5V
+5V
+5V
GND