Before you start:
This setup shows how it works on „Dymo LabelWriter Software Version 7.0 for
Windows" – lower versions might vary.
Configure the SX-2000WG to make it available on the network
(Quicksetup e.g.).
Connect SX-2000WG to the network and to your Dymo LabelWriter.
Install the SX-Virtual Link application.
( SX-Virtual Link Version 1.3.0 is used in this setup – older versions might not have the auto connect feature)
Download latest version from our website:
http://www.silexeurope.de/euro/support/printserver/virtuallink.html