Installing Word Add-In; Add-In For Microsoft Word - Dymo LabelWriter User Manual

Printing With Other
Add-In for
Microsoft
Word
Installing the
Word Add-In
Most applications, including word processors and
database managers, can use LabelWriter printers just like
any other standard printers. This chapter explains how to
print labels using the Microsoft Word Add-in. It also
covers how to print to the LabelWriter using other
applications.
DYMO Label Software includes an add-in program that
enables you to quickly print mailing labels from a
Microsoft Word document. You access the add-in using an
icon the LabelWriter software installs on the Word toolbar.
The add-in works with Microsoft Word 98.
The Microsoft Word Add-In is normally installed at the
same time that you install the main DYMO Label
Software. If it is already installed, you will see a small
LabelWriter button in the main toolbar of Microsoft Word.
If you don't see this icon, and it cannot be enabled using
the instructions below, you will need to reinstall your
DYMO Label Software.
"
When you reinstall the DYMO LabelWriter Software, all
of the supplied templates are also reinstalled. If you have
made any changes to the supplied templates and not
saved the changes with a new file name, copy the
changed templates to another location before you
reinstall the software so you don't lose your changes.
Then once the installation is complete, copy the
templates back into the Labels folder.
When the Word Add-in is properly installed, you will see
the LabelWriter button in the main toolbar of Microsoft
Word.
Applications
Chapter 5
29