Table of Contents
Advertisement
Bluetooth
The XDMA7600 supports A2DP (advanced audio distribution profile) wireless streaming audio from
your Bluetooth mobile device directly to your head unit. You can also control your music from the front
panel of the head unit using AVRCP (audio video remote control profile).
Notes:
• To stream music to your head unit, your mobile device must support the A2DP and
AVRCP Bluetooth profiles. Check the owner's manual of your mobile device for details.
• Streaming audio must be enabled from your mobile device. This option will vary
depending on the device. Some devices allow streaming audio to be disabled.
After pairing, connecting and enabling streaming audio from a compatible mobile device, begin playing
music using the music player on your mobile device. Once the music is playing, the following functions
can be used to control the music:
• The
button will skip to the next available audio track.
ll
• The
button will skip to the previous audio track.
nn
l
/ II
• The
button will toggle between play and pause during playback.
• The
button will stop the audio playback.
Note: Some Bluetooth devices may not fully support these commands.
Resetting the Bluetooth module will remove the list of paired phones and delete the list of recent calls
from memory.
To reset Bluetooth, perform the following steps:
1) Press SOURCE until the head unit is in Bluetooth mode.
2) Press and hold MUTE for 3 seconds to reset the Bluetooth settings back to the factory default.
Compatibility Note:
Due to the differences in Bluetooth technology, some mobile devices may be incompatible, function
improperly or may not support all features when used with the XDMA7600.
Function
Bluetooth
Auto Connect
AUTO CON (ON/OFF)
Auto Answer
AUTO ANS (OFF/ON)
Speaker Output
BT SPRKS (FRONT/ALL)
XDMA7600
Operation
®
Streaming Audio Operation
Bluetooth Reset
Bluetooth Setup Menu Options
Options
BL'TOOTH (ON/OFF)
Enables/disables Bluetooth functionality.
Set to ON to allow a Bluetooth device to connect automatically.
Setting to OFF requires manually connecting the device.
When set to ON, every incoming phone call will automatically be
answered after 2-3 rings. When set to OFF, the
be pressed to answer incoming phone calls.
Set to FRONT to direct the Bluetooth audio output to the front
speakers only. Set to ALL to enable Bluetooth audio to output from
all 4 speakers.
24
Action
button must
Advertisement
Table of Contents
