Table of Contents
Advertisement
3.3.7 Hardware Monitor Sub-Menu
You can use this screen to configure the Hardware Monitor submenu. Use
the up and down arrow ( / ) keys to select an item. Use the Plus and Minus
(+/-) keys to change the value of the selected option. The settings are described
on the following pages.
Main
Advanced
Hardware Monitor
H/W Monitor Function
Auto FAN Control
FAN Fail LED Indicator
Hardware Health Event Monitoring
Voltage Monitoring
CPU1 Temperature
CPU2 Temperature
Ambient Temp (Near IB)
Ambient Temp (Near MCP55)
FAN1 (TACH1)
FAN2 (TACH3)
FAN3 (TACH5)
FAN4 (TACH2)
FAN5 (TACH4)
FAN6 (TACH6)
PSUFAN1 (TACH7)
PSUFAN2 (TACH9)
Feature
Hardware Monitor
H/W Monitor Function
Auto FAN Control
FAN Fail LED
Indicator
BIOS Setup Utility
PCI/PnP
Boot
[Enabled]
[Disabled]
[Disabled]
:xx C/ xxx F
:xx C/ xxx F
:xx C/ xxx F
:xx C/ xxx F
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
:xxxx RPM
Option
Enabled
Enables Hardware Health Monitoring Device.
Disabled
Enabled
FAN
programmed in selected temperature range.
Disabled
Enabled
Enabled: Any FAN speed less than 800 RPM, the
FAN Fail LED will be lighted.
Disabled
43
Security
Enables Hardware
Health Monitoring
Device.
← → Select Screen
↑↓ Select Item
+/-
Tab Select Field
F1
F10 Save and Exit
ESC Exit
Description
power
duty
cycle
Chipset
Exit
Change Option
General Help
is
auto
dynamic
Advertisement
Table of Contents
