South Bridge Configuration - TYAN S8010 User Manual

3.7.2 South Bridge Configuration

Main
SouthBridge Chipset Configuration
SB700 CIMx Version: x.x.x
OHCI HC (Bus 0 Dev 18 Fn 0)
OHCI HC (Bus 0 Dev 18 Fn 1)
EHCI HC (Bus 0 Dev 18 Fn 2)
OHCI HC (Bus 0 Dev 19 Fn 0)
OHCI HC (Bus 0 Dev 19 Fn 1)
EHCI HC (Bus 0 Dev 19 Fn 2)
OHCI HC (Bus 0 Dev 20 Fn 5)
OnChip SATA Channel
OnChip SATA Type
SATA IDE Combined Mode
Restore on AC Power Loss
NMI Button
Chassis Intrusion detection
SGPIO function
Watchdog Mode
Watchdog Timer
OHCI HC/EHCI HC
Enabled / Disabled
OnChip SATA Channel
Enable or disable OnChip SATA channel.
Enabled / Disabled
OnChip SATA Type
Select OnChip SATA type.
Native IDE / RAID / AHCI / Legacy IDE
SATA IDE Combined Mode
Enable or disable the SATA IDE Combined Mode.
Disabled / Enabled
Restore On AC Power Loss
Configure how the system board responds to a power failure.
Power Off / Power On / Last State
Advanced PCI/PnP
http://www.tyan.com
BIOS Setup Utility
Boot Security
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Native IDE]
[Enabled]
[Last State]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[2]
74
Chipset Exit
Disabled
Enabled
Select Screen
←
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit