Troubleshooting Heart Rate - Precor EFX 532i Owner's Manual

Troubleshooting Heart Rate

The following table may help you understand and troubleshoot
erratic heart rate readings.
Important: A heart rate can only be detected when the Precor
heart rate receiver is properly installed in the display. A user must
wear the chest strap or grasp both touch-sensitive grips.
Table 2. Erratic heart rate readings
What Cause
appears
on the
display
Nothing The heart rate receiver is
not installed or it has
been disconnected.
A signal is being
HR or Hr
detected through the
chest strap or the
touch-sensitive grips,
but a valid heart rate is
not yet established.
Note: To conduct electrical impulses from a user's heart, both
touch-sensitive grips must be grasped firmly for five to ten
seconds. Usually, the concentration of salts in a person's
perspiration provides enough conductivity to transmit a signal to
the receiver in the display console. However, because of body
chemistry or erratic heartbeats, some people cannot use the
touch-sensitive grips. A chest strap may provide better results.
User's Reference Manual: Heart Rate Features
What to do
Call Customer Support. Refer to
Obtaining Service.
Be sure that the chest strap is
moist, centered, and in direct
contact with your skin. If you are
using the touch-sensitive grips,
continue to grasp both of them.
Wait a few moments for your
heart rate to appear.
17