Advertisement
6.
Refer to the ISS SIM Connections illustration and connect only the sensor
cables as shown. You will connect the power cables in the next procedure.
3-Volt Lithium Battery
(wireless models only)
SIM Power Cable
(wireless only)
UV Sensor Cable
Solar Radiation Cable
Rain Collector Cable
Anemometer Cable
Temp/Humidity Cable
Console Cable (cabled only)
Procedure 8. Power the SIM.
Powering the Cabled ISS SIM
Cabled versions of the ISS receives power from the console via the 100' (30m)
cable that runs between them.
• Plug the console cable into the SIM connector labeled "CONSOLE".
Installation Outline
UV
SUN RAIN WIND
TEMP
UV
SUN RAIN WIND
HUM
Transmitter
ID Switches
Page 9
Advertisement
