DAVIS VANTAGE PRO ISS Retrofit Kit Installation Instructions Manual page 16

Procedure 3. Mount the new Temp/Hum module
1. Remove the Fan from the lower section of the radiation shield.
2. Remove the old Temp/Hum module from the radiation shield and replace
with the new Temp/Hum module.
3. Reinstall the fan making sure the sensor cable is set into the cable channel.
Page 16
Motor Connector
Temp/Hum
Sensor Cable
Channel
Temp/Hum
Sensor
Cable
Fan Removal and Installation
Installing the Temp/Hum Module
Fan Unit
Fan Deflector
Junction Boar
Fan Plat
Installation - ISS with External SIM