Table of Contents
Advertisement
GS k n [ d ] k NUL
Printing the Bar Code
[Function]
[Code]
<1D>H<6B>H<n> [ < d> ] k <00>H
{0 =< n =< 7} Data are described in Hex code.
[Range]
[Outline]
Specifying a type of bar code and printing bar codes.
• The beginning of line is considered as the next printing start position.
• Depending on the value of n, the following bar code can be selected.
d indicates a character code to be printed and k indicates the number of character to be
printed.
• When data being held in the print buffer, this command is ignored.
[Caution]
• Regardless of the specified feed pitch, this command feeds the paper to be required to
print a bar code.
• If the character code d cannot be printed in the respective bar code system, the bar
code so far will be printed, processing the subsequent data as normal data.
• When a bar code whose number of characters to be printed is fixed has been selected,
the number of characters k have to be always made equal to the number of characters
to be printed. (The bar code is not printed when not matching.)
• When the horizontal direction exceeds one line length, the excess part is not printed.
• The initial va lue is not specified.
[Default]
n (Hex)
Bar Code System
0
1
2
JAN13 (EAN)
3
JAN 8 (EAN)
4
5
6
CODABAR (NW-7)
7
UPC-A
UPC-E
CODE 39
ITF
CODE 128
55
BD2-2890DD SPECIFICATIONS
Maximum Columns
---
---
---
---
13
22
17
15
Advertisement
Table of Contents
