Operation Errors - Citizen BD2-2890DD Specifications

7.2 Operation Errors

(1) Error types
Error
No paper
Head –up
VH voltage error
Head temperature error
Caution: The 8.5V upper-limit voltage for VP voltage error is only an assumptive voltage just
after charging the battery when using the battery power. It cannot be normally used. A
normal maximum voltage is 7.2V.
(2) External signal outputs
Pin No Signal Name
B
(3) Resetting methods
Error
No paper
Head –up
VP voltage error
Head temperature
error
Caution:
The 8.5V upper-limit voltage for VP voltage error is only an assumptive voltage just
after charging the battery when using the battery power. It cannot be normally used. A
normal maximum voltage is 7.2V.
The printing paper set is not set
The head-up lever is at its up position
A VH voltage is beyond its allowable range (4.2 to 8.5V)
A head temperature is less than 0˚C or 65 ˚C or higher.
DTR Serial interface
Set the paper. See Note 1.
Bring down the head-up lever.
Set to a voltage within the allowable range (4.2 to 8.5V) and turn on the power
again.
At the lower limit (less than 0 ˚C), printing becomes operational at 0 ˚C higher.
At the upper limit (65 ˚C or higher), it become operational at 60 ˚C or lower.
Description
Remarks
Resetting Method
13
BD2-2890DD SPECIFICATIONS