Citizen BD2-2890DD Specifications page 55

GS ^ n1 n2 n3
Executing the Macro
[Function]
<1D>H<5E>H<n1><n2><n3>
[Code]
{0 =< n1 =< FF}
[Range]
{0 =< n2 =< FF}
{0 =< 3 =< 1} Data is described in Hex code.
[Outline] Executing contents defined in macro.
• "n1~ n3" indicate as follows:
n1 : The number of times of macro execution
n2 : Waiting time on macro execution
Waiting time of n2 x 100msec is given for every execution.
n3 : Macro execution mode
n3
Continuous execution:
Execution by FEED S:
• When this command is received while in macro definition, suspension of macro definition is
[Caution]
indicated. At this time, the defined content is cleared.
• No execution takes place when macro is held undefined or n1=0.
• While in macro execution with n3=1, paper feed with the LF SW is not available.
• Initially, this command is not specified.
[Default]
GS :
[See Also]
[Sample Program]
See Sample Program and Print Results for GS : on Page 57.
0 Continuous execution
1 Execution by LFSW
[Print Results]
Mode
The Macro is executed n1 times continuously at the time
intervals specified by n2.
After waiting for lapse of time specified by n2, the ALAME
LED flickers and the LF switch is waited to be pressed. When
it is pressed, the macro is executed once.
This action is repeated n1 times.
51
BD2-2890DD SPECIFICATIONS