Citizen BD2-2890DD Specifications page 56

GS H n
Selecting of Printing Position of HRI Code
[Function]
[Code] <1D>H<48>H<n>
[Range]
{0 =< n =< 3} Data is described in Hex code.
[Outline] Selecting printing position of HRI code in printing bar codes.
• "n" means the followings.
The HRI code refers to the bar code-turned characters so that you can read them.
The HRI code is printed in the font selected with GS f. Specify before the GS k command.
[Caution]
• The initial value of n is "0".
[Default]
GS f
[See Also]
[Sample Program]
LPRINT CHR$ (&H1B) + "3" + CHR$ (5);
LPRINT CHR$ (&H1D) + "h" + CHR$ (50);
LPRINT CHR$ (&H1D) + "H" + CHR$ (0);
GOSUB BC
LPRINT CHR$ (&H1D) + "H" + CHR$ (1);
GOSUB BC
LPRINT CHR$ (&H1D) + "H" + CHR$ (2);
GOSUB BC
LPRINT CHR$ (&H1D) + "H" + CHR$ (3);
GOSUB BC
END
BC:
LPRINT CHR$ (&H1D) + "k";
LPRINT CHR$ (4);
LPRINT "12" + CHR$ (0);
LPRINT CHR$ (&HA);
RETURN
n (Hex)
0
1
2
3 Both above and below the bar code
Printing Position
No printing
Above the bar code
Below the bar code
[Print Results]
52
BD2-2890DD SPECIFICATIONS
No Visible Code
Printed above
Printed below
Printed above
and below