Citizen BD2-2890DD Specifications page 47

ESC * m n1 n2 [ d ] k
[Function] Specifying the Bit Image Mode
[Code] <1B>H<2A>H<m><n1><n2> [ <d> ] k
[Range] {m= 0, 1, 32, 33 bit image mode (See the table below.)}
{0 =< n1 =< FF(Hex)}
{0 =< n2 =< 03(Hex)}
{0 =< d =< FF(Hex)}
{k = n1 + FF(Hex)
{k = (n1+ FF(Hex) n2) 3}
[Outline] According to the number of dots specified in n1, n2, specify the bit image of mode n.
• The No. of dots printed is divided by 256, whose quotient is taken as n2 and residual as n1.
• The total no. of dots printed in the bit image is equal to n1 + (256 x n2).
• When bit image data have been input in excess of dot position of one line (448 dots) ,
the excess data are discarded.
• d is bit image data, the bits subject to printing are taken as "1" and those not as "0".
• The bit image modes specified by m are shown as follows:
m(Hex) Mode
0 8-dot single density
1 8-dot double density
32 24-dot single density
33 24-dot double density
• When the values set in m (bit image mode) are out of the above range, the data
[Caution]
following after n1 is processed as normal printing data.
• After completion of bit image printing, printer returns to normal data processing mode.
[Examp le]
Single Density Double Density
×
n2 (m = 0, 1)
× ×
(m = 32, 33)
Vertical Direction
No. of Dots Dot Density
8
8
24
24
Single Density Double Density
43
Horizontal Direction
Dot Density
67 DPI 101 DPI
67 DPI 203 DPI
203 DPI 101 DPI
203 DPI 203 DPI
BD2-2890DD SPECIFICATIONS
Max. No. of Dots
192
384
192
384