Citizen BD2-2890DD Specifications page 41

ESC $ n1 n2
[Function] Specifying the Absolute Positions
<1B>H<24>H<n1><n2>
[Code]
[Range] {0 =< n1 =< FF}
{0 =< n2 =< 1} Data is described in Hex code.
The printing start position is specified in the number of dots (1/203 inch unit) from
[Outline]
the beginning of line.
• The number of dots is divided by 256, whose quotient is taken as n2 and the residual as n1.
• Therefore, the printing start position is equal to n1+n2 x 256 from the beginning of line.
• Specifying beyond the line end is ignored.
[Caution]
• The initial value is not specified.
[Default]
ESC \
[See Also]
[Sample Program]
LPRINT CHR$ (&H1B) + "$";
LPRINT CHR$ (0) + CHR$ (0) + "A";
LPRINT CHR$ (&H1B) + "$";
LPRINT CHR$ (50) + CHR$ (0) + "B";
LPRINT CHR$ (&H1B) + "$";
LPRINT CHR$ (0) + CHR$ (1) + "C";
LPRINT CHR$ (&HA);
LPRINT CHR$ (&H1B) + "$";
LPRINT CHR$ (100) + CHR$ (0) + "A";
LPRINT CHR$ (&H1B) + "¥";
LPRINT CHR$ (&HC2) + CHR$ (&HFF) + "B";
LPRINT CHR$ (&HA);
[Print Results]
Absolute Position Specified
Relative Position Specified – 62
37
BD2-2890DD SPECIFICATIONS