DESCRIPTION OF DISPLAY MARKS
DISPLAY MARK
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE / min
SYSTOLIC mmHg DIASTOLIC mmHg
CONDITION/CAUSE
The cuff was not inflated to more than 30-40 mmHg
above your systolic pressure.
The cuff was inflated to more than 280 mmHg.
Appears when the blood pressurecould not be mea-
sured accurately.
Appears when the pulse could not be measured ac-
curately.
Appears when the battery becomes weak.
Device has a trouble.
- Eng 10 -
CORRECTIVE ACTION
Raise the set pressure value by higher
level.
Exhaust the air within the cuff.
Repeat measurement again.
Replace the battery.
Ask purchased shop.