[Tools] Menu; [Image] Menu - Casio PJ Camera Software 1.2 User Manual

Menus and Commands

[Tools] Menu

Command
Operating
Environment
Operation Bar
Properties

[Image] Menu

Command
Specify Contour
Correct
Brightness
Enhance White/
Normal Color
Trapezoid
Correction On
Rotate Right
Rotate Left
This command displays a dialog box for configuring PJ Camera
Software operating environment settings.
This command displays a dialog box for configuring operation bar
properties.
This command can be used during projection in the Document
Camera Mode, PC Image Mode, Camera Image Mode, and Scanner
Mode. Executing this command displays a contour specification
dialog box for manual specification of a contour within the recorded
image of the image that is being projected.
This command can be used during projection in the Document
Camera Mode, PC Image Mode, Camera Image Mode, and Scanner
Mode.
Executing this command displays a dialog box for adjusting the
brightness of the recorded image of the image that is being
projected.
This menu appears during projection in the Document Camera
Mode, PC Image Mode, and Camera Image Mode. Use this menu
to turn white enhancement on or off.
This command can be used during projection in the Document
Camera Mode, PC Image Mode, Camera Image Mode, and Scanner
Mode.
When there is no check mark next to [Trapezoid Correction On],
images are projected without trapezoid correction. When there is a
check mark next to [Trapezoid Correction On], images are projected
with trapezoid correction.
These commands can be used in the Document Camera Mode, PC
Image Mode, Camera Image Mode, and Scanner Mode.
While an image is being projected:
Executing one of these commands rotates the projected image.
While a thumbnail is selected in the PC Image Mode preview list
area or playlist area:
Executing one of these commands rotates the image in the file of
the selected thumbnail.
Description
Description
129