Adjusting The Camera Position - Casio PJ Camera Software 1.2 User Manual

Multi pj camera system controller software for windows

Table of Contents

Using the PJ System Like an OHP Projector (Document Camera Mode)

■ Adjusting the Camera Position

Performing any one of the following operations causes a dialog box for adjusting camera

position to appear on the screen.

Starting up PJ Camera Software by turning on the PJ Camera Stand (which automatically

enters the Document Camera Mode)

Performing a Projection Area Capture or Board Area Capture operation, and then changing

to the Document Camera Mode or Scanner Mode

Bumping the PJ Camera so it moves considerably while in the Document Camera Mode or

Scanner Mode

If the dialog box for adjusting camera position appears, point the PJ Camera downwards at

the document stage, and make sure there is no document on the stage. The camera position

will be adjusted automatically to record documents placed onto the document stage.

If the camera is pointed at the document stage and there is nothing on it, camera

position adjustment will end automatically.

Triggering a Manual Record Operation during Auto Projection

Even when using [Auto] for automatic recording and projection of images, you can trigger a

record operation manually by selecting [Shutter] on the [Camera] menu (page 128). This

comes in handy when the document cannot be recorded automatically because slight

movement is being detected, or when you simply do not want to wait for the PJ System to

record automatically.

Configuring Document Camera Settings

Selecting [Operating Environment] on the [Tools] menu displays an operating environment

dialog box. You can configure the following settings on the [Document Camera] tab of the

dialog box.

Selecting [Auto] or [Manual]

Turning display of the rough (monitor) image on and off

Settings for auto rotation of the document camera image

Selecting the resolution of images recorded with the PJ Camera

Selecting "Small" or "Full Screen" for the size of the monitor image

For details about what these settings do and how to configure them, see "Configuring

Operating Environment Settings" (page 111).

Table of Contents