Dolby Digital 2.0 Discs; Dts 5.1 Discs; 7Lno; Dts 96/24 Discs - Rotel RSP-1570 Owner's Manual

English English
Pro Logic IIx Music center back processing, DD with Pro Logic IIx
Cinema back channel processing, or DD with Rotel XS center back
processing. You should typically select Surround EX or discs that
are labeled Dolby Digital Surround EX. For standard 5.1 channel
discs, Dolby Pro Logic IIx Music or Rotel XS processing will provide a
more diffused surround effect than the more highly localized Dolby
EX decoding and may be the better 7.1 channel options for non-
Surround EX discs. Selecting DD 5.1 forces the center back channel
processing off for conventional 5.1 channel playback. You can also
repeatedly press the DOLBY PLIIx Mode button on the front panel until
the desired center back channel option is selected.
Note: When playing any Dolby Digital source, you can select
one of three dynamic range control settings. See the Dynamic
Range topic in the Other Settings section of this manual.

Dolby Digital 2.0 discs

7LNO

Dolby Digital decoding is auto-detected and cannot be overridden. You
may, however, select 2-channel playback, 5.1 channel playback with Pro
Logic II matrix surround, 6.1/7.1 channel playback with Pro Logic IIx
matrix surround, or Dolby 3-Stereo playback.
• On a 5.1 system. Press the SUR+ button on the remote, then use
the +/– buttons to step through four options: DD 2.0 channel, DD
with Pro Logic II Cinema matrix surround, DD with Pro Logic II Music
matrix surround, or Dolby Digital 3 channel stereo. You can also
repeatedly press the 2CH button on the front panel or the remote to
select the same options.
• On a 6.1/7.1 system. Press the SUR+ button on the remote, then
use the +/– buttons to step through four options: DD 2.0 channel,
DD with Pro Logic IIx Cinema matrix surround, DD with Pro Logic IIx
Music matrix surround, or Dolby Digital 3 channel stereo. You can
also repeatedly press the 2CH button on the front panel or the remote
to select the same options.
• To select Cinema or Music options in Pro Logic II or Pro Logic
IIx modes. Press the SUR+ button twice while in Pro Logic II or Pro
Logic IIx modes. Then, use the +/– buttons to select the Music or
Cinema options.
Note: When playing any Dolby Digital source, you can select
one of three dynamic range control settings. See the Dynamic
Range topic in the Other Settings section of this manual.

DTS 5.1 discs

DTS 96/24 discs

DTS-ES 6.1 discs

7LNO
DTS decoding is auto-detected and cannot be overridden. You may,
however, select a 2-channel downmix of 5.1 channel recordings or add
Rotel XS center back processing for 5.1 channel discs.
Note: In addition to the options that follow, you can press the
2CH button on the remote to toggle between 2-channel downmix
and multichannel playback.
• On a 5.1 system. Press the SUR+ button on the remote, then press
the +/– buttons to change between DTS 5.1 channel or DTS 2.0
channel downmix playback.
• On a 6.1/7.1 system with a DTS 5.1 disc. Press the SUR+ button
on the remote, then use the +/– buttons to step through the optional
modes: DTS 2.0 channel downmix, DTS 5.1 channel, DTS with Rotel
XS center back processing, DTS with Pro Logic IIx Music center back
processing, or DTS with Pro Logic IIx Cinema center back processing
(available only for 7.1 channel systems). Selecting DTS 5.1 forces
the center back channel processing off for conventional 5.1 channel
playback. You can also repeatedly press the DTS Neo:6 button on the
front panel until the desired option is selected.
• On a 6.1/7.1 system with a DTS-ES disc. Press the SUR+ button
on the remote, then use the +/– buttons to step through three optional
modes: DTS 2.0 channel downmix, DTS 5.1, or DTS-ES 6.1ch/7.1ch
playback. On the front panel, press the DTS Neo:6 button while
playing a DTS source to step through the same options.
• On a 6.1/7.1 system with a DTS 96/24 disc. Press the SUR+
button on the remote, then use the +/– buttons to step through the
optional modes: DTS 2.0 channel downmix, DTS 96, or DTS 96 with
Rotel XS center back processing. You can also repeatedly press the
front panel DTS Neo:6 button until the desired option is selected.

Digital Stereo discs

7LNO
This group of recordings includes any non-Dolby Digital 2-channel
signal from the processor's digital inputs. You can play these recordings
in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo, 7-CH Stereo modes. You
can also use Dolby Pro Logic II matrix surround (5.1 ch systems), Dolby
Pro Logic IIx Music (6.1/7.1 ch systems), Dolby Pro Logic IIx Cinema
(6.1/7.1 ch systems), DTS Neo:6 surround, or one of the DSP 1-4
modes.
All of the bass management settings (speaker size, subwoofer, and
crossover) are in effect with digital stereo inputs.
Note: In addition to the options that follow, you can select 2-
channel, Pro Logic II Cinema (for 5.1 ch systems), Pro Logic II
Music (for 5.1 ch systems), Pro Logic IIx Music (for 6.1/7.1 ch
systems), Pro Logic IIx Cinema (for 7.1 ch systems), 5-channel
stereo, or 7-channel stereo by pressing one of the surround mode
buttons on the remote (2CH, PLC, PLM, 5CH, 7CH).
• To select any mode for 2-channel digital recordings. Press the
SUR+ button on the remote, then use the +/– buttons to step through
the optional modes until the desired mode is displayed.
• To select STEREO mode for 2-channel digital recordings. Press
the 2CH button on the front panel or remote.
• To select Dolby multichannel modes for 2-channel digital
recordings. You can also step through the Dolby options (Pro Logic
II, Pro Logic IIx, or 3-Stereo) by repeatedly pressing the DOLBY PLIIx
Mode button on the front panel. You can select Pro Logic or Pro Logic
IIx Cinema or Music modes by pressing the PLC or PLM buttons on
the remote.
To change the Cinema or Music option in Pro Logic II mode, press the
SUR+ button on the remote twice while in Pro Logic II or Pro Logic IIx
modes. Then, press the +/– buttons to select the option.
• To select DTS Neo:6 mode for 2-channel digital recordings.
You can also step through the DTS options (Neo:6 Cinema or Neo:6
33 33