Table of Contents
Advertisement
Figure 1: RR-DV96 Remote Control
1
TV/DVD switch
Switches the RDV-1050 between TV control mode
and the DVD player control mode.
OPEN/CLOSE button
2
Opens and closes the disc tray.
Repeat button
3
Switches the RDV-1050 among "no repeat" mode,
"repeat 1" mode and to "repeat all" mode.
Numeric buttons
4
In DVD/CD mode use these to select a title or track
number, to enter a time for the Time search. In TV
mode they are used to select a TV channel.
SUBTITLE button
5
Used to activate the on-screen subtitle selection dis-
play and to turn the subtitle on or off (for DVD VIDEO).
ANGLE button
6
Changes camera angles during playback of a DVD
VIDEO disc containing multiple camera angles.
PAGE button
7
Lets you select from the available still pictures when
playing an DVD AUDIO disc.
8
TITLE/GROUP button
Used to select a Title when playing a DVD VIDEO
disc, and to select a Group when playing a DVD
AUDIO disc.
/PREVIOUS button
9
Skips back a chapter, title or track. Also used for the
page selection of a menu screen (for DVD VIDEO/
Video CD). Holding down this button during play-
back rapidly scans to earlier scenes.
■ (STOP)/CLEAR button
10
Stops playback. Also used to erase all the programmed
tracks for the program play.
/SLOW – button
11
During playback lets you reverse disc play at 1.5 to
60 times normal speed. When disc play is paused
press to reverse disc play at 1/2 to 1/32 normal
speed.
TOP MENU button
12
Press to display a menu to select specific scenes on
a disc.
VOLUME –/CURSOR
13
When in TV mode press to reduce volume. When in
DVD mode press to select an item from a menu or
on-screen display, or to change the setting of an item
in the on-screen display.
CHANNEL –/CURSOR
14
When in TV mode press to go to a lower channel.
When in DVD mode press to select an item from a
menu or on-screen display, or to change the setting
of an item in the on-screen display.
CHOICE button
15
Displays the DVD set-up menu. Is also used when
selecting parental lock settings
Infrared signal output window
16
Point this toward the remote sensor on the front panel
when pressing buttons.
DVD POWER button
17
TV POWER button
18
Press to turn the RDV-1050 or your TV on or off
(standby).
RDV-1050 DVD Player
3
TV / DVD switch
1
PAL/NTSC button
36
OPEN/CLOSE button
2
REPEAT button
3
Numeric buttons
4
SUBTITLE button
5
ANGLE button
6
7
PAGE button
TITLE / GROUP button
8
9
/ PREVIOUS button
10
(STOP) / CLEAR button
/ SLOW – button
11
12
TOP MENU button
VOLUME – / CURSOR
13
CHANNEL – / CURSOR
14
15
CHOICE button
RETURN button
19
Returns to the previous menu (for SVCD/Video CD).
DIMMER button
20
Adjusts the brightness or turns off the display.
VSS button
21
Turn on/off the simulated Virtual Surround Sound
system.
+10/MUTING button
22
Used when selecting or programming numbered tracks
or scenes above 10. Also used to mute the TV sound.
TV/VIDEO/CANCEL button
23
Used to switch inputs when controlling the TV. Used
to remove selected items when setting up programmed
Button
track play. Also used when setting up the RR-DV96
to control the TV.
AUDIO/fs/RATE button
24
Press and release to select various audio options during
disc play. Press and hold for a few seconds to select
Button
the sampling frequency and bit length.
ZOOM button
25
When viewing video discs allows the image on the
screen to be enlarged from 1.8 to 64 times normal
size.
VFP/PROG SCAN button
26
Press and release to select the VFP function which
sets video play properties. Press and hold for a few
seconds to select progressive or interlace scan out-
put. (With U.S. version the Video Signal Selector switch
must be set to Remote to use this function. See
the Audio/Video Connections section.)
/NEXT button
27
Skips forward a chapter, title or track. Holding down
this button during playback advances playback rap-
idly.
button
button
28
Pauses playback.
29
Starts playback. SELECT function is not used.
30
During playback lets you advance disc play at 1.5
to 60 times normal speed. When disc play is paused
press to advance disc play at 1/2 to 1/32 normal
speed.
31
Displays various menus that let you select items
from the disc.
32
When in TV mode press to go to a higher channel.
When in DVD mode press to select an item from a
menu or on-screen display, or to change the setting
of an item in the on-screen display.
33
When in TV mode press to increase volume. When
in DVD mode press to select an item from a menu or
on-screen display, or to change the setting of an item
in the on-screen display.
34
Displays various menus on the screen that let you select
control and programing functions.
35
Press to accept various selections such as channels
selected with the numeric buttons or in some program-
ming steps.
36
European Version Only. Select a PAL or NTSC out-
put signal when the Video Signal Selector switch
is set to REMOTE.
Infrared signal output window
16
DVD POWER button
17
TV POWER button
18
RETURN button
19
DIMMER button
20
VSS button
21
+10 / MUTING button
22
TV/VIDEO / CANCEL button
23
AUDIO / fs/RATE button
24
ZOOM button
25
VFP / PROG SCAN button
26
/ NEXT button
27
(PAUSE) button
28
(PLAY)/ SELECT button
29
/ SLOW + button
30
MENU button
31
CHANNEL + / CURSOR
32
VOLUME + / CURSOR
33
ON SCREEN button
34
ENTER button
35
II (PAUSE) button
(PLAY)/SELECT button
/SLOW button
MENU button
CHANNEL +/CURSOR
VOLUME +/CURSOR
Button
ON SCREEN Button
ENTER button
PAL/NTSC button
button
button
Button
Advertisement
Table of Contents
