Burley Pre-2004 d’Lite User Manual page 4

NOTE: if you have a 2004 Encore, this step is not necessary.
Locate the replacement parts for the roll bar catch and hinge, and their counterparts
on the trailer (see the fi gure, top of next page). The "catch" is located on the trailer's
right, the "hinge" is on the left.
First remove the old hinge from the left side of the trailer by removing the hex head
bolt that attaches the roll bar. Then remove the Phillips head screw that holds the
hinge to the frame. Save both the hex head and Phillips bolts for installing the new
hinge.
Fasten the new hinge onto the
trailer's left side using the #3
driver, the existing Phillips head
bolt and the new standard nut
provided. The nut will fi t snugly
into the hex shape recess in
the center of the part. Tighten
securely.
4
Burley Walk 'n Roller Manual; models 2003 and earlier