Related Manuals for Burley Stroller Kit
Summary of Contents for Burley Stroller Kit
- Page 1 Burley Stroller Kit Owner’s Instruction and Safety Manual For D’Lite, Solo, Encore, Cub, ™ ™ ™ ™ Honeybee, and Tailwagon ™...
-
Page 2: Safety Guidelines
Congratulations! Safety Guidelines By purchasing the Burley Stroller Kit, you’ve increased the fun 1. Consult your child trailer manual for trailer safety guidelines. and excitement that you and your family can have with your 2. Always use the handle bar tether. -
Page 3: Installation
Tools Required: 3. Slide stroller kit onto tow bar. Figure 3 (2) 10mm open end wrenches (1) 25mm (or 1”) wrench (1) 5mm hex wrench Installation 1. Remove tow bar from trailer. 2. Remove nut and bolt from tow bar end. Discard bolt and lock nut. - Page 4 To Adjust Tracking 5. Around handlebar center, slide tether strap end through small loop on other end of strap and tighten securely. Photo 1 1. Tighten knob to secure stroller wheel in “Stroll” position. See Figure 6 2. Loosen bolt using 5mm hex wrench. Figure 6 3.
-
Page 5: To Convert From Strolling To Trailering
Lubricate stroller wheel assembly twice a year for normal use, or monthly if used in wet or salty conditions. Inspect handle, receivers, parking brake, and wheel monthly. Contact Burley to replace any damaged parts. 2. Line up rear tow bar hole with rear receptacle hole. Insert retaining pin through both holes and lock retaining hoop securely. - Page 6 Burley will repair or replace parts it determines to be defective for a period of five years. The Burley accessory owner must present the accessory for repair at place of purchase, with an original sales receipt or similar proof of purchase.